Optiview VR4HT User Manual page 141

Please refer to the following sheet for detailed information.
Parameter Function
Here is for you to modify system time. Please click Save button after
System
your completed modification
Time
Sync PC You can click this button to save the system time as your PC current
time.
Here you can select data format from the dropdown list.
Data
Format
Please select separator such as – or /.
Data
Separator
There are two options: 24-H and 12-H.
Time
Format
DST Here you can set day night save time begin time and end time. See
Figure 7-27 and Figure 7-28.
Language You can select the language from the dropdown list. Device needs to
reboot to get the modification activated.
There are two options: stop recording or overwrite the previous files
HDD Full
when HDD is full.
When current working HDD is overwriting or it is full now, system
stops record.
If current working HDD is full now, system goes to overwrite the
previous file.
Here you can select file size. The value ranges from 1 to 120.Default
Pack
setup is 60 minutes.
Duration
When you are using one remote control (not included in the
Device No
accessory bag) to manage multiple devices, you can give a serial
numbers to the device.
Video There are two options: PAL/NTSC.
Standard
Please note, for the Web user, this information is for reference only.
You can not modify.
Device Please input the corresponding device name here.
Name
7.5.2.2 Encode
Encode interface is shown as in Figure 7-29.
131