Model Update; Figure 39: Template Management - Grandstream Networks UCM6510 IP PBX User Manual

User could also click on "Add New Field" to add a P value number and the value to the configuration.
The following figure shows setting P value "P1362" to "en", which means the display language on the
LCD is set to English. For P value information of different models, please refer to configuration
template here http://www.grandstream.com/support/tools.

Click on Save when done. The model template will be displayed on web UI->PBX->Zero
Config->Model Templates page.

to delete the model template or click on "Delete Selected Templates" to delete multiple
Click on
selected templates at once.

Click on "Toggle Selected Template(s)" to toggle the status between enabled/disabled for the selected
model templates.

MODEL UPDATE

UCM6510 zero config feature supports provisioning all models of Grandstream SIP end devices.
Templates for most of the Grandstream models are built in with the UCM6510 already. Templates for
GXP16XX, GSWave and Surveillance products requires user to download on UCM6510 web
UI->PBX->Zero Config->Model Update first as those products are more often used as needed. After
downloading the model template, it will show in the dropdown list for "Model" selection when editing the
model template.

Click on to download the template.

User could also upload model template package to UCM6510.
Firmware Version 1.0.1.12

Figure 39: Template Management

UCM6510 IP PBX User Manual Page 83 of 277