Cleaner; Table 90: Cleaner Configuration; Figure 146: Cleaner - Grandstream Networks UCM6510 IP PBX User Manual

CLEANER

Users could configure to clean the Call Detail Report/Voice Records/Voice Mails/FAX automatically under
web GUI->Maintenance->Cleaner.
Enable CDR Cleaner
CDR Clean Time
Clean Interval
Enable VR Cleaner
Choose Cleaner File
VR Clean Threshold
VR Clean Time
Clean Interval
All the cleaner logs will be listed on the bottom of the page.
Firmware Version 1.0.1.12

Figure 146: Cleaner

Table 90: Cleaner Configuration

Enable the CDR Cleaner function.
Enter 0-23 to specify the hour of the day to clean up CDR.
Enter 1-30 to specify the day of the month to clean up CDR.
Enter the Voice Records Cleaner function.
Select the file type(s) to be cleaned automatically.
Specify the Voice Records threshold from 0 to 99 by using local storage
status in percentage.
Enter 0-23 to specify the hour of the day to clean up Voice Records.
Enter 1-30 to specify the day of the month to clean up Voice Records.
UCM6510 IP PBX User Manual Page 270 of 277