Model Configuration; Model Templates; Table 27: Create New Model Template - Grandstream Networks UCM6510 IP PBX User Manual

The added options will show in the list. Users can then enter or select value for each option to be used
in the global template. On the left side of each added option, users can click on
option from the template. On the right side of each option, users can click on
value to the default value.

Click on "Save" to save this global template.

The created global templates will show in the web UI->PBX->Zero Config->Global Templates page.
Users can click on
multiple selected templates at once.

Click on "Toggle Selected Template(s)" to toggle the status between enabled/disabled for the selected
templates.

MODEL CONFIGURATION

MODEL TEMPLATES

Model layer configuration allows users to apply model-specific configurations to different devices. Users
could create/edit/delete a model template by accessing web GUI, page PBX->Zero Config->Model
Templates. If multiple model templates are created and enabled, when the user configures the device in
Edit Device dialog->Advanced Settings, the user can select to use one of the model template for the
device. Please refer to section
For each created model template, users can assign it as default model template. If assigned as default
model template, the values in this model template will be applied to all the devices of this model. There is
always only one default model template that can be assigned at one time on the UCM6510.
The selected model template and the default model template will both take effect when generating the
config file for the device. However the model template has higher priority to default model template when it
comes to the same setting option/field. If the same option/field has different value configured in the default
model template and the selected model template, the value for this option/field in the selected model
template will override the value in default model template.

Click on "Create New Template" to add a model template.
Model
Firmware Version 1.0.1.12
to delete the global template or click on "Delete Selected Templates" to delete
MANAGE DEVICES
[

Table 27: Create New Model Template

Select a model to apply this template. The supported Grandstream
models are listed in the dropdown list for selection.
UCM6510 IP PBX User Manual
for more details on using the model template.
]
to remove this
to reset the option
Page 81 of 277