Grandstream Networks UCM6510 IP PBX User Manual page 170

Response Timeout Prompt
Invalid Prompt
Response Timeout Repeat
Loops
Invalid Repeat Loops
Language
Key Press Event
Firmware Version 1.0.1.12
the timeout, a timeout prompt will be played. The default setting is 10
seconds.
Select the prompt message to be played when timeout occurs.
Select the prompt message to be played when an invalid extension is
pressed.
Configure the number of times to repeat the prompt if no DTMF input is
detected. When the loop ends, it will go to the timeout destination if
configured, or hang up. The default setting is 3.
Configure the number of times to repeat the prompt if the DTMF input is
invalid. When the loop ends, it will go to the invalid destination if
configured, or hang up. The default setting is 3.
Select the voice prompt language to be used for this IVR. The default
setting is "Default" which is the selected voice prompt language under web
GUI->PBX->Internal Options->Language. The dropdown list shows all
the current available voice prompt languages on the UCM6510. To add
more languages in the list, please download voice prompt package by
selecting "Check Prompt
Options->Language.
Select the event for each key pressing for 0-9, *, Timeout and Invalid. The
event options are:

Extension

Voicemail

Conference Rooms

Voicemail Group

IVR

Ring Group

Queues

Page Group

Fax

IVR Prompt

Hangup

DISA

Dial By Name

External Number
UCM6510 IP PBX User Manual
List" under web GUI->PBX->Internal
Page 168 of 277