Paging And Intercom Group; Configure Paging/Intercom Group; Table 55: Paging/Intercom Group Configuration Parameters; Figure 87: Paging/Intercom Group - Grandstream Networks UCM6510 IP PBX User Manual

Paging and Intercom Group can be used to make an announcement over the speaker on a group of
phones. Targeted phones will not ring but answer immediately using speaker. The UCM6510 paging and
intercom can be used via feature code to a single extension or a paging/intercom group. This sections
describes the configuration
Features->Paging/Intercom.

CONFIGURE PAGING/INTERCOM GROUP


Click on "Create New Paging/Intercom Group" to add paging/intercom group.
Name
Extension
Type
Custom Prompt
Page/Intercom Group
Firmware Version 1.0.1.12

PAGING AND INTERCOM GROUP

of paging/intercom

Figure 87: Paging/Intercom Group

Table 55: Paging/Intercom Group Configuration Parameters

Configure paging/intercom group name.
Configure the paging/intercom group extension.
Select "2-way Intercom" or "1-way Page".
This option is setting a custom prompt used as announcement placed to
the person receiving a paging/internal call. The file can be uploaded from
the web GUI->Internal Options->Custom Prompt, or click the 'Prompt' to
add additional recorded.
Select available users from the left side to the paging/intercom group
UCM6510 IP PBX User Manual
group under web GUI->PBX->Call
Page 183 of 277