One-Key Dial; Figure 102: Configure One-Key Dial - Grandstream Networks UCM6510 IP PBX User Manual

ONE-KEY DIAL

The UCM6510 supports One-Key Dial that allows users to call a certain destination by pressing one digit 0
to 9 on the keypad. This creates a system-wide speed dial access for all the extensions on the UCM6510.
To enable One-Key Dial, on the UCM6510 web GUI, go to page PBX->Call Features->One-Key Dial.

Figure 102: Configure One-Key Dial

User should first decide a digit used for One-Key Dial and check the option "Enable Destination" for the
Then select a dial destination from "Default Destination". The supported destinations include
digit.
extension, voicemail, conference room, voicemail group, IVR, ring group, call queue, page group, fax,
DISA, Dial by Name and external number.
Firmware Version 1.0.1.12 UCM6510 IP PBX User Manual Page 203 of 277