Grandstream Networks UCM6510 IP PBX User Manual page 164

Record Conference
Quiet Mode
Wait For Admin
Enable User Invite
Announce Callers
Public Mode
Play Hold Music For First
Caller
Music On Hold
Skip Authentication When
Inviting User via Trunk from
web GUI
Firmware Version 1.0.1.12
If enabled, the calls in this conference bridge will be recorded automatically
in a .wav format file. All the recording files will be displayed and can be
downloaded in the conference web page. The default setting is "No".
If enabled, if there are users joining or leaving the conference, voice
prompt or notification tone won't be played. The default setting is "No".
Note:
"Quiet Mode" and "Announce Callers" cannot be enabled at the same time.
If enabled, the participants will not hear each other until the conference
administrator joins the conference. The default setting is "No".
Note:
If "Quiet Mode" is enabled, the voice prompt for "Wait For Admin" will not
be announced.
If enabled, users could press 0 to invite other users (with the users'
permission) or press 1 to invite other users (without the user's permission)
to join the conference. The default setting is "No".
Note:
Conference administrator can always invite other users without enabling
this option.
If enabled, the caller will be announced to all conference participants when
there the caller joins the conference. The default setting is "No".
Note:
"Quiet Mode" and "Announce Callers" cannot be enabled at the same time.
If enabled, no authentication will be required when joining the conference
call. The default setting is "Yes".
If enabled, the UCM6510 will play Hold music to the first participant in the
conference until another user joins in. The default setting is "No".
Select the music on hold class to be played in conference call. This option
shows up if "Play Hold Music For First Caller" is enabled. Music On Hold
class can be set up under web UI->PBX->Internal Options->Music On
Hold.
If enabled, the invitation from web GUI for a conference bridge with
password will skip the authentication for the invited users. The default
setting is "No".
UCM6510 IP PBX User Manual Page 162 of 277