Figure 25: UCM6510 Email Settings: Send Test Email
TIME SETTINGS
AUTO TIME UPDATING
The current system time on the UCM6510 is displayed on the upper right of the web page. It can also be
found under web GUI->Status->System Status->General.
To configure the UCM6510 to update time automatically, go to web GUI->Settings->Time Settings->
Auto Time Updating.
Note:
The configurations under Web GUI->Settings->Time Settings->Time Auto Updating page require
reboot to take effect. Please consider configuring auto time updating related changes when setting up the
UCM6510 for the first time to avoid service interrupt after installation and deployment in production.
Firmware Version 1.0.1.12
UCM6510 IP PBX User Manual
Page 59 of 277