Disa; Table 60: Disa Settings; Figure 104: Create New Disa - Grandstream Networks UCM6510 IP PBX User Manual

In many situations the user will find the need to access his own IPPBX resources but he is not physically
close to any one of his extensions. However, he does has access to his own cell phone. In this case we
can use what is commonly known as DISA (Direct Inward System Access). Under this scenario, the user
will be able to call from the outside first, whether it's using his cell phone, pay phone, regular PSTN and
etc, and then call into a SIP trunk or PSTN trunk connected to UCM6510 as it is an internal extension.
The UCM6510 supports DISA to be used in IVR or inbound route. Before using it, create new DISA under
web GUI->Call Features->DISA.

Click on "Create New DISA" to add a new DISA.

Click on to edit the DISA configuration.

Click on to delete the DISA.
Name
Password
Firmware Version 1.0.1.12

DISA

Figure 104: Create New DISA

Table 60: DISA Settings

Configure DISA name to identify the DISA.
Configure the password (digit only) required for the user to enter before
using DISA to dial out.
Note:
The password has to be at least 4 digits.
UCM6510 IP PBX User Manual Page 205 of 277