Extensions; Create New User; Create New Sip Extension; Table 28: Sip Extension Configuration Parameters - Grandstream Networks UCM6510 IP PBX User Manual

CREATE NEW USER

CREATE NEW SIP EXTENSION

To manually create new SIP user, go to web GUI->PBX->Basic/Call Routes->Extensions. Click on
"Create New User"->"Create New SIP Extension" and a new dialog window will show for users to fill in the
extension information. The configuration parameters are as follows.
General
Extension
CallerID Number
Permission
SIP/IAX Password
Enable Voicemail
Voicemail Password
Firmware Version 1.0.1.12

EXTENSIONS

Table 28: SIP Extension Configuration Parameters

The extension number associated with the user. This is the SIP UserID for
registration.
Configure the CallerID Number that would be applied for outgoing calls
from this user.
Note:
The ability to manipulate your outbound Caller ID may be limited by your
VoIP provider.
Assign permission level to the user. The available permissions are
"Internal", "Local", "National" and "International" from the lowest level to
the highest level. The default setting is "Internal".
Note:
Users need to have the same level as or higher level than an outbound
rule's privilege in order to make outbound calls using this rule. If the
outbound rule privilege is disabled, this option will not take effect.
Configure the password for the user. A random secure password will be
automatically generated when the extension is created. It is recommended
to use this password or other strong password for security purpose.
Enable voicemail for the user so that the call will be forwarded to the user's
voicemail if there is no answer or the call is rejected. The default setting is
"Yes".
Configure voicemail password (digits only) for the user to access the
voicemail box. A random numeric password is automatically generated
when the extension is created. It is recommended to use the random
generated password for security purpose.
UCM6510 IP PBX User Manual Page 97 of 277