Firmware Version 1.0.0.25 - Grandstream Networks UCM6510 IP PBX User Manual


Added One-Key Dial function [ONE-KEY DIAL]

Added Follow Me support [FOLLOW ME]

Supported external number as the key pressing event of an IVR [Table 49: IVR Configuration
Parameters]

Improved APIs for Zero Config templates and settings [PROVISIONING]

Supported GXP16XX, Surveillance and GS_wave models in Zero Config [PROVISIONING]

Added advanced settings for devices discovered in Zero Config [DEVICE CONFIGURATION]

Added ability to delete multiple recording files at one time [RECORDING FILES]

Added call queue destination if no answer/timeout [Table 56: Call Queue Configuration Parameters]

Added call queue Music on Hold customization [Table 56: Call Queue Configuration Parameters]

Added restricted AMI access [ASTERISK MANAGER INTERFACE (RESTRICTED ACCESS)]
Warning: Please do not enable AMI on the UCM6510 if it is placed on a public or untrusted network
unless you have taken steps to protect the device from unauthorized access. It is crucial to understand
that AMI access can allow AMI user to originate calls and the data exchanged via AMI is often very
sensitive and private for your UCM6510 system. Please be cautious when enabling AMI access on the
UCM6510 and restrict the permission granted to the AMI user. By using AMI on UCM6510 you agree
you understand and acknowledge the risks associated with this.

Added ability to choose the type(s) of files to be cleaned in cleaner [CLEANER]

Added DTMF configuration per SIP trunk [Table 42: SIP Trunk Configuration Parameters]

Added ability to upload and play ring group announcement [Table 54: Ring Group Parameters]

Added ability to upload and play paging call announcement [PAGING AND INTERCOM GROUP]

Added Alert-info configuration for distinctive ringing on inbound route [Table 46: Inbound Rule
Configuration Parameters]

Added ability to prepend digits/trunk name to inbound calls' caller ID [Table 46: Inbound Rule
Configuration Parameters]

Modified Static Routes Interface display when network method is changed [STATIC ROUTES]

FIRMWARE VERSION 1.0.0.25


This is the initial version.
Firmware Version 1.0.1.12 UCM6510 IP PBX User Manual Page 16 of 277