If there are two FXO ports connected to PSTN lines, use the following settings for auto-detection.
Detect Model: Auto Detect.
Source Channel: The source channel to be detected.
Destination Channel: The channel to help detecting. For example, the second FXO port.
Destination Number: The number to be dialed for detecting. This number must be the actual
PSTN number for the FXO port used as the destination channel.
If there is only one FXO port connected to PSTN line, use the following settings for auto-detection.
Detect Model: Semi-auto Detect.
Source Channel: The source channel to be detected.
Destination Number: The number to be dialed for detecting. This number could be a cell phone
number or other PSTN number that can be reached from the source channel PSTN number.
Firmware Version 1.0.1.12
Figure 59: UCM6510 PSTN Detection: Auto Detect
Figure 60: UCM6510 PSTN Detection: Semi-Auto Detect
UCM6510 IP PBX User Manual
Page 119 of 277