Reset And Reboot; Syslog; Figure 147: Reset And Reboot - Grandstream Networks UCM6510 IP PBX User Manual

RESET AND REBOOT

Users could perform reset and reboot under web GUI->Maintenance->Reset and Reboot.
To factory reset the device, select the mode type first. There are two different types for reset.

User Data: All the data including voicemail, recordings, IVR Prompt, Music on Hold, CDR and backup
files will be cleared.

All: All the configurations and data will be reset to factory default.

SYSLOG

On the UCM6510, users could dump the syslog information to a remote server under web
GUI->Maintenance->Syslog. Enter the syslog server hostname or IP address and select the module/level
for the syslog information.
The default syslog level for all modules is "error", which is recommended in your UCM6510 settings
because it can be helpful to locate the issues when errors happen.
Some typical modules for UCM6510 functions are as follows and users can turn on "notic" and "verb"
levels besides "error" level.
pbx: This module is related to general PBX functions.
chan_sip: This module is related to SIP calls.
chan_dahdi: This module is related to analog calls (FXO/FXS).
app_meetme: This module is related to Conference Bridge.
Firmware Version 1.0.1.12

Figure 147: Reset and Reboot

UCM6510 IP PBX User Manual Page 271 of 277