Upgrading Via Local Upload; Table 88: Network Upgrade Configuration; Figure 139: Local Upgrade - Grandstream Networks UCM6510 IP PBX User Manual

Upgrade Via
Firmware Server Path
Firmware File Prefix
Firmware File Suffix
HTTP/HTTPS User Name
HTTP/HTTPS Password
Please follow the steps below to upgrade the firmware remotely.

Enter the firmware server path under web GUI->Maintenance->Upgrade.

Click on "Save". Then reboot the device to start the upgrading process.

Please be patient during the upgrading process. Once done, a reboot message will be displayed in the
LCD.

Manually reboot the UCM6510 when it's appropriate to avoid immediate service interruption. After it
boots up, log in the web GUI to check the firmware version.

UPGRADING VIA LOCAL UPLOAD

If there is no HTTP/TFTP server, users could also upload the firmware to the UCM6510 directly via web
GUI. Please follow the steps below to upload firmware locally.
1. Download the latest UCM6510 firmware file from the following link and save it in your PC.
http://www.grandstream.com/support/firmware
2. Log in the web GUI as administrator in the PC.
3. Go to web GUI->Maintenance->Upgrade, upload the firmware file by clicking on
firmware file from your PC. The default firmware file name is ucm6510fw.bin
Firmware Version 1.0.1.12

Table 88: Network Upgrade Configuration

Allow users to choose the firmware upgrade method: TFTP, HTTP or
HTTPS.
Define the server path for the firmware server.
If configured, only the firmware with the matching encrypted prefix will be
downloaded and flashed into the UCM6510.
If configured, only the firmware with the matching encrypted postfix will be
downloaded and flashed into the UCM6510.
The user name for the HTTP/HTTPS server.
The password for the HTTP/HTTPS server.

Figure 139: Local Upgrade

UCM6510 IP PBX User Manual
and select the
Page 264 of 277