Front Wheel - KYMCO ZX Service Manual

13. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
Install the handlebar, aligning the tabs of the
handlebar with the grooves in the steering
stem.
Install and tighten the handlebar lock nut.
Torque: 4.5 5.0kg-m
Lubricate the throttle pipe front end with
grease.
Install the throttle grip and connect the throttle
cable.
The installation sequence is the reverse of
removal.
Install the rear brake lever holder.
Install the front brake master cylinder (disk
brake).
Tab/Groove
Holders

FRONT WHEEL

ZX / SCOUT
50
Throttle Cable
Brake Master Cylinder
13-4