KYMCO ZX Service Manual page 150

13. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
BALL RACE REPLACEMENT
Drive out the ball races.
Drive in new ball races.
*
Be sure to drive the ball races into place
completely.
13-21
Bottom Cone Race
Ball Race Remover
Outer Driver, 37x40mm
INSTALLATION
Apply grease to top and bottom ball races and
install 26 steel balls on the top ball race and 29
steel balls on the bottom ball race.
Apply grease to the ball races again and then install
the front fork.
ZX / SCOUT
Driver Handle A