KYMCO ZX Service Manual page 78

8
. KICK STARTER/DRIVE PULLEY/
CLUTCH/DRIVEN PULLEY
KICK STARTER INSTALLATION
Install the kick starter spindle bushing and
return spring onto the left crankcase cover.
*
If the hooks of the return spring can not be
installed properly, use a screw driver to
press them into their locations respectively.
Properly install the kick starter driven gear and
friction spring as the figure shown.
Kick Starter Spindle Forcing Part
8-5
Kick Starter Driven Gear Forcing Part
Kick Starter Spindle
Friction Spring
Kick Starter Driven Gear
First install the washer and then the circlip onto the
kick starter spindle.
Install the kick lever.
ZX / SCOUT
Return Spring