KYMCO ZX Service Manual page 81

8
. KICK STARTER/DRIVE PULLEY/
CLUTCH/DRIVEN PULLEY
DRIVE BELT INSTALLATION
Turn the driven pulley clockwise and lift it up
to expand the drive belt groove and then install
a new drive belt.
Set the drive belt on the drive pulley.
Install the drive pulley face, starting ratchet and
washer, then tighten the drive face nut.
Torque: 3.5 4.0kg-m
*
When installing the drive face nut, make
sure that the tooth spaces of the drive
pulley face and starting ratchet align with
the teeth of the crankshaft.
Clutch/Driven Pulley
Drive Belt
Drive Belt
Drive Face Nut Drive Pulley Face
Starting Ratchet
DRIVE PULLEY
REMOVAL
Hold the drive pulley with the holder and remove
the drive face nut.
Remove the starting ratchet, washer and drive
pulley face.
ZX / SCOUT
Drive Belt
Washer
8-8