KYMCO ZX Service Manual page 139

13. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
Remove the two bolts attaching the brake
caliper.
Remove the brake caliper.
Remove the brake pad pins to remove the
brake pads.
Install the brake pads in the reverse order of
removal.
Tighten the brake pad pin bolts.
Torque: 1.5 2.0kg-m
*
Keep grease or oil off the brake pads to
avoid brake failure.
Brake Disk
Measure the brake disk thickness.
Service Limit: 3.0mm
Measure the brake disk runout.
Service Limit: 0.3mm
Pad Pin
BRAKE MASTER CYLINDER
Removal
First drain the brake fluid from the hydraulic brake
system.
*
Front Brake Caliper
Brake Pads
Front Brake Caliper
• When servicing the brake system, use
shop towels to cover rubber and plastic
parts and coated surfaces to avoid being
contaminated by brake fluid.
• When removing the brake fluid pipe bolt,
be sure to plug the pipe to avoid brake
ZX / SCOUT
50
13-10