KYMCO ZX Service Manual page 86

8
. KICK STARTER/DRIVE PULLEY/
CLUTCH/DRIVEN PULLEY
Pull out the guide roller pins from the driven
pulley and then remove the O-rings and oil seal
from the driven pulley.
CLUTCH/DRIVEN PULLEY
INSPECTION
Inspect the clutch outer for wear or damage.
Measure the clutch outer I.D.
Service Limit:
107.5mm replace if below
8-13
Check the clutch shoes for wear or damage.
Measure the clutch lining thickness.
Service Limit: 2.0mm replace if below
ZX / SCOUT