KYMCO ZX Service Manual page 142

13. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
Install the brake fluid pipe with the attaching
bolt and two sealing washers.
Install the handlebar covers. ( ð 12-3)
Fill the brake reservoir with recommended
brake fluid to the upper limit and bleed air
according to the method stated in 13-9.
BRAKE CALIPER (FRONT)
Removal
Remove the brake caliper. ( ð 13-10)
Place a clean container under the brake caliper
and disconnect the brake fluid pipe from the
caliper.
*
Do not spill brake fluid on any coated
surfaces.
Punch Mark
13-13
Bolts
Bolt
Disassembly
Remove the brake caliper seat from the brake
caliper.
ZX / SCOUT
"Up" Mark