13. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
REMOVAL
Jack the motorcycle front wheel off the
ground.
Remove the speedometer cable set screw and
disconnect the speedometer cable.
Remove the front axle nut and pull out the axle.
Remove the front wheel.
Remove the brake panel side collar.
INSPECTION
Set the axle in V blocks and measure the
runout.
The actual runout is ½ of the total indicator
reading.
Service Limit: 0.2mm replace if over
Axle Nut
13-5
Check the wheel rim runout.
Service Limits:
ZX / SCOUT
Speedometer Cable