KYMCO ZX Service Manual page 136

13. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
ASSEMBLY
Pack all bearing cavities with grease.
Drive in the left bearing .
Install the distance collar.
Drive in the right bearing.
*
Drive the bearing squarely with the sealed
end facing out.
13-7
Bearing Puller
Pilot, 10mm
Pilot, 10mm
Outer Driver, 28x30mm
Apply grease to the dust seal lip and install the dust
seal.
Install the side collar.
ZX / SCOUT
Grease