13. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
Apply grease to the top cone race and install it.
Tighten the top cone race and then turn the
steering stem right and left several times to
make steel balls contact each other closely.
*
Check that the steering stem rotates freely
without vertical play.
Install the steering stem lock nut and tighten it
while holding the top cone race.
Torque: 8.0 12.0kg-m
Install the front wheel. ( ð 13-8)
Install the handlebar. ( ð 13-4)
Install the speedometer cable.
ZX / SCOUT
50
Top Cone Race
Lock Nut Socket Wrench
Lock Nut Wrench
13-22