KYMCO ZX Service Manual page 87

8
. KICK STARTER/DRIVE PULLEY/
CLUTCH/DRIVEN PULLEY
Measure the driven face spring free length.
Service Limit:
82.6mm replace if below
Check the driven face assembly for wear or
damage.
Measure the driven face O.D.
Service Limit: 33.94mm replace if below
Check the movable driven face for wear or
damage.
Measure the movable driven face I.D.
Service Limit: 34.06mm replace if below
Check the guide roller pins for stepped wear.
DRIVEN PULLEY FACE BEARING
REPLACEMENT
Check the needle bearings in the driven face and
replace them if they have excessive play, damage
or abnormal noise.
Drive the inner bearing out of the driven pulley
face.
ZX / SCOUT
8-14