9
. FINAL REDUCTION
DISAS-SEMBLY
Remove the rear wheel. ( ð 14-3)
Remove the left crankcase cover. ( ð 8-3)
Remove the clutch/driven pulley. ( ð 8-7)
Drain the transmission gear oil into a clean
container.
Remove the transmission case cover attaching
bolts.
Remove the transmission case cover.
Remove the gasket and dowel pins.
Remove the final gear and countershaft.
FINAL REDUCTION INSPECTION
Inspect the countershaft and gear for wear or
damage.
9-3
Bolts
Driver shift
Countershaft
Countershaft
Inspect the final gear and final shaft for wear,
ZX / SCOUT
Driver shaft
Final Gear
Dowel Pin