KYMCO ZX Service Manual page 71

7
. A.C. GENERATOR
Remove the A.C. generator wire connector.
Remove the two pulser coil bolts and pulser
coil from the right crankcase.
Remove the pulser coil wire clamp from the
right crankcase.
Remove the two bolts attaching the A.C.
generator stator.
*
Be careful not to damage the
discon-nected wire.
A.C. GENERATOR
INSTALLATION
Install the A.C. generator stator and pulser coil
wire clamp onto the right crankcase, and then
install the pulser coil.
Lock Nut Wrench
A.C. Generator Wire Connector
Stator
Connect the A.C. generator wire connector.
ZX / SCOUT
Flywheel Puller
Wire Clamp
Pulser Coil
7-4