KYMCO ZX Service Manual page 83

8
. KICK STARTER/DRIVE PULLEY/
CLUTCH/DRIVEN PULLEY
MOVABLE DRIVE FACE INSPECTION
Check each weight roller for wear or damage.
Measure each roller O.D.
Service Limit:
12.4mm replace if below
DRIVE PULLEY INSTALLATION
Install the drive pulley collar and movable drive
face onto the crankshaft.
Weight Roller
Movable Drive Face
Drive Pulley Collar
Install the drive belt on the crankshaft.
Install the drive face, starting ratchet and washer,
then tighten the 12mm drive face nut.
Torque: 3.5 4.0kg-m
*
Keep grease or oil off the drive belt and
drive pulley faces.
ZX / SCOUT
8-10