Engine Installation - KYMCO ZX Service Manual

5
. ENGINE REMOVAL/INSTALLATION
Inspect the stopper rubbers and bushings for
damage and replace with new ones if
necessary.

ENGINE INSTALLATION

Install the engine in the reverse order of
removal.
*
Cables and wires should be routed
properly.
Torque Values:
Engine mounting bolt
Rear shock absorber lower mount bolt:
Perform the following inspections and
adjustments after installation.
• Throttle cable
• Oil pump control cable ( ð 3-10)
• Rear brake cable ( ð 3-4)
• Oil pump bleeding ( ð 4-5)
Engine Hanger
: 4.5 5.5kg-m
2.4 3.0kg-m
Stopper Rubbers
ZX / SCOUT
Bushings
5-4