Connection Settings - Panasonic JOIP BB-GT1540E Operating Instructions Manual

Global voip telephone
Hide thumbs Also See for JOIP BB-GT1540E:
Table of Contents

Advertisement

Preparation
Configuring the Internet

connection settings

If your local network uses a DHCP
(Dynamic Host Configuration Protocol)
server for automatic IP address
assignments, you do not need to change
any settings. If your local network uses a
static IP address, turn the DHCP
connection mode off.
Leaving the DHCP connection mode on
allows the base unit to receive an IP
address automatically from a DHCP
server on your local network.
Automatic setup (default) N
The base unit automatically obtains an
IP address and other Internet connection
settings (subnet mask, default gateway,
and DNS server addresses).
Turning the DHCP connection mode
on:
1
K i {#}{5}{0}{0}
2
{V}/{^}: "On"
3
M i {i}
L Wait until the 4 indicator on the
base unit turns green. When the
4 indicator lights in green, the
setting is complete. Confirm your
A number (page 31).
L When the 4 indicator on the
base unit does not light in green
even if you wait for a few minutes,
see page 24.
Note:
L To view the Internet connection
settings:
K i {#}{5}{0}{1} i When
finished, press {i}.
30
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Static setup N
If your local network does not use a
DHCP server for automatic IP address
assignments, turn the DHCP connection
mode off first. Then set the static IP
address and other Internet connection
settings corresponding to your local
network.
Turning the DHCP connection mode
off:
1
K i {#}{5}{0}{0}
2
{V}/{^}: "Off"
3
M i {i}
Setting the static IP address and
other settings:
1
K i {#}{5}{0}{1}
2
Set the IP address and other
settings.
L Push the joystick down {V} or up
{^} to move between the
following 5 items.
Enter the IP address in
IP
this data field.
address
L Set 4 numbers (0-
Enter the subnet mask
Subnet
in this data field.
mask
L Set 4 numbers (0-
Enter the default
Default
gateway address in
gateway
this data field.
L Set 4 numbers (0-
*1
255) separated by
periods such as
"192.168.0.253".
*1
255) separated by
periods such as
"255.255.255.0".
*1
255) separated by
periods such as
"192.168.0.1".

Advertisement

Table of Contents
loading

Table of Contents