Table of Contents
Advertisement
Other settings
Eco mode setting
Handset
You can select the desired eco mode setting by
pressing MECON.
The following settings are available for eco mode.
– "Eco": Reduces the base unit transmission
power by up to 90 % in standby mode.
When this setting is selected,
– "Eco Off" (default setting): Turns off eco
mode.
When this setting is selected,
displayed.
*1 Handset:
is displayed instead of
Note:
R When there is another cordless phone in use
nearby, the base unit transmission power may
not be reduced.
R When eco mode is active, the range of the base
unit is reduced in standby mode.
R If you set repeater mode to "On" (page 38):
– Eco mode is disabled.
– "Eco Mode" is not displayed in the display
menu (page 30).
Dialling mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is "Tone".
"Tone": For tone dial service.
"Pulse": For rotary/pulse dial service.
You can configure this setting using either the
base unit or one of the handsets.
Handset / Base unit
1
M
N#120
2
MbN: Select the desired setting. a MOKN
3
Proceed with the operation for your unit.
Handset: M
N
Base unit: M
N
KX-TGF310_320BX_UE_0706_ver002.pdf 15
*1
is displayed.
is not
.
Getting Started
15
7/29/2015 11:36:00 AM
Advertisement
Table of Contents
