Default Value
Configuration File Reference
Voice Mail Access Number
Description
Value Range
Default Value
Configuration File Reference
Enable Shared Call
Description
Value Range
Default Value
Configuration File Reference
Feature Key Synchronization
Description
Document Version 2014-04
No
VM_SUBSCRIBE_ENABLE (Page 258)
Specifies the phone number used to access the voice mail server.
Note
•
Your phone system must support voice mail.
Max. 32 characters
Not stored.
VM_NUMBER (Page 259)
Selects whether to enable the Shared Call feature of the SIP server,
which is used to share one line among the units.
Note
•
You cannot set both [Enable Shared Call] and [Feature Key
Synchronization] to [Yes] at the same time.
•
Availability depends on your phone system.
•
Yes
•
No
Note
•
If you select [Yes], the SIP server will control the line by using
a shared-call signaling method. If you select [No], the SIP
server will control the line by using a standard signaling method.
No
SHARED_CALL_ENABLE (Page 260)
Selects whether to synchronize the feature key settings, configured via
the Web user interface or phone user interface, between the unit and
the portal server that is provided by your phone system dealer.
Note
•
Even if you select [Yes], this feature may not function properly
if your phone system does not support it. Before you configure
Feature Key Synchronization, consult your phone system
dealer.
4.6.2 Call Control [Line 1]–[Line n]
Administrator Guide
125