Setting Up The Ftp Client; Setting Up The Ftp Server - Toshiba e-STUDIO 600 User Manual

1) Enable SNTP
Select whether the SNTP service is enabled or disabled. When this is enabled, the time set-
tings of this equipment can be adjusted using the SNTP service.
2) Primary SNTP Server
Specify the IP address of the primary SNTP server when the SNTP service is enabled.
3) Secondary SNTP Server
Specify the IP address of the secondary SNTP server as you require.
When the "Obtain a SNTP Server Address automatically" option is enabled in the TCP/IP
settings, the SNTP server address can be obtained using the DHCP server.
P.123 "Setting up the TCP/IP"
4) Scan Rate
Enter how often this equipment should access the SNTP server.
5) Port Number
Enter the port number for the SNTP service. Generally "580" is used for the SNTP port num-
ber.

Setting up the FTP Client

In FTP Client, you can specify the default port number used for the Save as file using the FTP
protocol.
1
1) Default Port Number
Enter the port number to access the FTP site. The port number depends on the port setting
in the FTP site. Generally "21" is used.

Setting up the FTP Server

In FTP Server, you can enable or disable the FTP server functions.
1
2
3
4
1) Enable FTP Server
Select whether the FTP server is enabled or disabled. Select Enable to enable the following
functions.
- FTP printing
Setting up from TopAccess 143