7 TopAccess Administrator Mode
Setting up Print Service Settings
In the Print Service submenu page in the Setup menu, an administrator can configure such print
services as Raw TCP Print, LPD Print, IPP Print, FTP Print, NetWare Print, and Email Print.
The Print Service submenu page in the Setup menu is available only when the Printer Kit or the Printer/
Scanner Kit is installed.
Setting the Print Service settings
1
Access TopAccess in the administrator mode.
P.114 "Accessing TopAccess Administrator Mode"
2
Click the Setup menu and Print Service submenu.
The Scan to Print Service submenu page is displayed.
3
In the Print Service submenu page, set the Print Service settings as
required.
In the Print Service submenu page, you can set the following:
186
Setting up from TopAccess
P.187 "Setting up the Raw TCP Print"
P.187 "Setting up the LPD Print"
P.188 "Setting up the IPP Print"
P.189 "Setting up the FTP Print"
P.190 "Setting up the NetWare Print"
P.190 "Setting up the Email Print"