Toshiba e-STUDIO 600 User Manual page 245

- PDF (Multi) — Select this to save scanned images as a Multi-page PDF file.
- PDF (Single) — Select this to save scanned images separately as Single-page PDF
files.
2) Encryption
Set this for encrypting PDF files if you have selected "PDF (Multi)" or "PDF (Single)" in the
File Format setting.
Encryption
Check this if you want to encrypt PDF files.
User Password
Enter a password for opening encrypted PDF files.
Master Password
Enter a password for changing the Encrypt PDF setting.
The user password is set "12345" at our factory. Ask the administrator for resetting master
password.
The passwords must be entered in one-byte alphanumeric characters. The minimum and
maximum numbers of characters allowed are 1 and 32.
The user password must differ from the master password.
These passwords can be re-entered only by an authorized user. Users cannot change the
settings of the Encryption Level field and the Authority field noted below if they are not
authorized to change the master password. Ask the administrator for resetting these
passwords.
For the details of the encryption setting, see the User Functions Guide.
Encryption Level
Select the desired encryption level.
- 128-bit RC4 - Select this to set an encryption level to the one compatible with Acrobat
5.0, PDF V1.4.
40-bit RC4 — Select this to set an encryption level to the one compatible with Acrobat
3.0, PDF V1.1.
Authority
Check the desired types of authority for Encrypt PDF.
- Printing
- Change of Documents
- Content Copying or Extraction
- Content Extraction for accessibility
3) Destination — Use local folder
Select this to save a received document to the "FILE_SHARE" folder.
4) Destination — Remote 1
Check this box to save a scanned file to the Remote 1. How you can set this item depends
on how your administrator configured the Save as file settings.
If the Remote 1 does not allow to specify a network folder, you can only select "Use Adminis-
trator Settings". The protocol and the network path are displayed below this item.
If the Remote 1 allows to specify a network folder, you can select "Use User Settings" and
specify the network folder settings by entering the following items:
Protocol
Select the protocol to be used for uploading a scanned file to the network folder.
- SMB — Select this to send a scanned file to the network folder using the SMB protocol.
Registering from TopAccess 245