Toshiba e-STUDIO 600 User Manual page 171

3) Server Name
When you select "FTP" as the protocol, enter the FTP server name or IP address where a
scanned file will be sent. For example, to send a scanned file to the "ftp://192.168.1.1/user/
scanned" FTP folder in the FTP server, enter "192.168.1.1" in this field. You can specify the
directory at the "Network Path" field.
When you select "NetWare IPX/SPX" as the protocol, enter the NetWare file server name or
Tree/Context name (when NDS is available).
When you select "NetWare TCP/IP" as the protocol, enter the IP address of the NetWare file
server.
4) Port Number (Command)
Enter the port number to be used for controls, if you select "FTP" as the protocol. Generally
"-" is entered for the control port. When "-" is entered, the port number, that is set at "FTP Cli-
ent" in the Network menu page of the Setup tab, will be used. Change this option if you want
to use another port number.
5) Network Path
Enter the network path to store a file.
When you select "SMB" as the protocol, enter the network path to the network folder. For
example, to specify the "user/scanned" folder in the computer named "Client01", enter
"\\Client01\users\scanned\".
When you select "FTP" as the protocol, enter the directory in the specified FTP server. For
example, to specify the "ftp://192.168.1.1/user/scanned" FTP folder in the FTP server, enter
"user/scanned".
When you select "NetWare IPX/SPX" or "NetWare TCP/IP" as the protocol, enter the folder
path in the NetWare file server. For example, to specify the "sys\scan" folder in the NetWare
file server, enter "\sys\scan".
6) Login User Name
Enter the login user name to access a SMB server or an FTP server or NetWare file server, if
required. When you select "FTP" as the protocol, an anonymous login is assumed if you
leave this field blank.
7) Password
Enter the password to access a SMB server or an FTP server or NetWare file server, if
required. The space can be entered.
8) Retype Password
Enter the same password again for a confirmation.
9) Allow user to select network folder to be used as a destination
Select this to allow users to specify a network folder as a destination. Otherwise, select
"Allow the following network folder to be used as a destination".
Setting up the N/W-Fax Destination
You can configure a network folder to store documents that are sent using the N/W-Fax driver
with the Save as file option enabled.
1
2
1) Do not allow any network folder to be used as a destination
Select this to not allow any network folders to be used as Save as file destinations for N/W-
Faxes documents. When selected, users can only save an N/W-Fax document with the
Save as file option enabled to local storage.
Setting up from TopAccess 171