Toshiba e-STUDIO 600 User Manual page 172

7 TopAccess Administrator Mode
2) Use Network Folder Destination
Select this to allow network folders to be used as Save as file destinations for N/W-Fax doc-
uments. When selected, set the N/W-Fax Folder settings to specify which network folder to
use.
Setting up the N/W-Fax Folder
In the N/W-Fax Folder, you can specify in which network folder N/W-Fax documents are saved.
1
2
3
4
5
6
1) Protocol
Select the protocol for uploading an N/W-Fax document to a network folder.
- SMB — Select this to send an N/W-Fax document to the network folder using the SMB
protocol.
- FTP — Select this to send a file to the FTP server.
- NetWare IPX/SPX — Select this to send a file to the NetWare file server using the IPX/
SPX protocol.
- NetWare TCP/IP — Select this to send a file to the NetWare file server using the TCP/IP
protocol.
2) Server Name
When you select "FTP" as the protocol, enter the FTP server name or IP address where an
N/W-Fax document will be sent. For example, to send an N/W-Fax document to the "ftp://
192.168.1.1/user/scanned" FTP folder in the FTP server, enter "192.168.1.1" in this field.
You can specify the directory at the "Network Path" field.
When you select "NetWare IPX/SPX" as the protocol, enter the NetWare file server name or
Tree/Context name (when NDS is available).
When you select "NetWare TCP/IP" as the protocol, enter the IP address of the NetWare file
server.
3) Port Number (Command)
Enter the port number to be used for controls, if you select "FTP" as the protocol. Generally
"-" is entered for the control port. When "-" is entered, the port number, that is set at "FTP Cli-
ent" in the Network menu page of the Setup tab, will be used. Change this option if you want
to use another port number.
4) Network Path
Enter the network path to store an N/W-Fax document.
When you select "SMB" as the protocol, enter the network path to the network folder. For
example, to specify the "users\nw-fax" folder in the computer named "Client01", enter
"\\Client01\users\nw-fax\".
When you select "FTP" as the protocol, enter the directory in the specified FTP server. For
example, to specify the "ftp://192.168.1.1/user/nw-fax" FTP folder in the FTP server, enter
"user/nw-fax".
When you select "NetWare IPX/SPX" or "NetWare TCP/IP" as the protocol, enter the folder
path in the NetWare file server. For example, to specify the "sys\scan" folder in the NetWare
file server, enter "\sys\scan".
172 Setting up from TopAccess
7