Setting Up Airprint In Topaccess; Enabling Or Disabling Airprint - Toshiba E-STUDIO2000AC Operator's Manual

Setting up AirPrint in TopAccess

0.
TopAccess allows you to configure the AirPrint. If necessary, change the settings.
If you want to change the AirPrint settings, you need to log into TopAccess as an administrator. For more information
about using TopAccess, refer to the TopAccess Guide.
 Enabling or Disabling AirPrint
The AirPrint can be enabled or disabled on the [Administrator] tab - [AirPrint] menu of TopAccess.
Settings
You can change the following AirPrint settings on the [Settings] - [AirPrint Settings] submenu.
Other than e-STUDIO5008LP Series
1
2
3
4
e-STUDIO5008LP Series
1
2
3
4
5
6
7
8
Item name
1 Enable AirPrint
If this setting is set to [Enable], Bonjour and IPP settings will also be enabled.
2 Printer Name
3 Location
26 Setting up AirPrint in TopAccess
Select [Enable] or [Disable] for the AirPrint. [Enable] is a default setting.
Enter a printer name that you select when printing.
If you prefer, enter any text that describes the location where the equipment is
set up.
Description