Setting Up The Netware Session - Toshiba e-STUDIO 600 User Manual

7 TopAccess Administrator Mode
12) SMB Signing of SMB Client
Select whether SMB Signing is enabled or disabled when this equipment accesses the cli-
ents using SMB, such as when this equipment stores the scanned data in the network folder
using SMB.
- If server agrees, digital signature is done for the communication — Select this to
use the digital signature to secure the communication to a SMB server only when the
SMB Signing of SMB Server that this equipment accesses is enabled. If the SMB Sign-
ing of SMB Server is disabled in a SMB server, the communication is performed without
the digital signature.
- Digital signature is always done for the communication on the client side — Select
this to make that this equipment always accesses a SMB server with a digital signature.
When the SMB Signing of SMB Server is disabled in a SMB server, the communication is
not allowed.
- Digital signature isn't done for the communication for the client — Select this to
communicate a SMB server without the digital signature. If the SMB Signing of SMB
Server is always enabled in a SMB server, the communication is not allowed.
If you do not know whether the SMB Signing of SMB Server is enabled or disabled in the
SMB servers, it is recommended to select "If server agrees, digital signature is done for
the communication". If this is set incorrectly, the SMB communication may become
unavailable.
When communicating the Windows Server 2003 as a SMB server, it is recommended to
select "If server agrees, digital signature is done for the communication" or "Digital signa-
ture is always done for the communication on the client side", because the SMB Signing
of SMB Server is enabled on the Windows Server 2003 as the default.

Setting up the NetWare Session

In NetWare Session, you can set the NetWare Bindery or NDS service. This must be set when
configuring a Novell printing environment.
1
2
3
4
5
1) Enable Bindery
Select whether the NetWare Bindery mode for Novell printing is enabled or disabled. When
you configure a Novell printing environment with the NetWare server in bindery mode, you
must enable this.
2) Enable NDS
Select whether the NetWare NDS mode for Novell printing is enabled or disabled. When you
configure a Novell printing environment with the NetWare server in NDS mode, you must
enable this. When this is enabled, you should also specify the context and tree for the NDS.
136 Setting up from TopAccess