Toshiba e-STUDIO 600 User Manual page 246

7 TopAccess Administrator Mode
- FTP — Select this to send a scanned file to the FTP server.
- NetWare IPX/SPX — Select this to send a scanned file to the NetWare file server using
the IPX/SPX protocol.
- NetWare TCP/IP — Select this to send a scanned file to the NetWare file server using
the TCP/IP protocol.
Server Name
When you select "FTP" as the protocol, enter the FTP server name or IP address where a
scanned file will be sent. For example, to send a scanned file to the "ftp://192.168.1.1/user/
scanned" FTP folder in the FTP server, enter "192.168.1.1" in this field. You can specify the
directory at the "Network Path" field.
When you select "NetWare IPX/SPX" as the protocol, enter the NetWare file server name or
Tree/Context name (when NDS is available).
When you select "NetWare TCP/IP" as the protocol, enter the IP address of the NetWare file
server.
Port Number (Command)
Enter the port number to be used for controls if you select "FTP" as the protocol. Generally
"-" is entered for the control port. When "-" is entered, the default port number, that is set for
FTP Client by an administrator, will be used. If you do not know the default port number for
FTP Client, ask your administrator and change this option if you want to use another port
number.
Network Path
Enter the network path to store a scanned file.
When you select "SMB" as the protocol, enter the network path to the network folder. For
example, to specify the "users\scanned" folder in the computer named "Client01", enter
"\\Client01\users\scanned\".
When you select "FTP" as the protocol, enter the directory in the specified FTP server. For
example, to specify the "ftp://192.168.1.1/user/scanned" FTP folder in the FTP server, enter
"user/scanned".
When you select "NetWare IPX/SPX" or "NetWare TCP/IP" as the protocol, enter the folder
path in the NetWare file server. For example, to specify the "sys\scan" folder in the NetWare
file server, enter "\sys\scan".
Login User Name
Enter the login user name to access a SMB server, an FTP server, or NetWare file server, if
required. When you select "FTP" as the protocol, an anonymous login is assumed if you
leave this field blank.
Password
Enter the password to access a SMB server, an FTP server, or NetWare file server, if
required.
Retype Password
Enter the same password again for a confirmation.
5) Destination — Remote 2
Check this box to save a received document to the Remote 2. How you can set this item
depends on how the 2st Folder has been set up in the Save as file submenu in the Setup
menu.
If the Remote 2 does not allow to specify a network folder, you can only select "Use Adminis-
trator Settings". The protocol and the network path are displayed below this item.
If the Remote 2 allows to specify a network folder, you can select "Use User Settings" and
specify the network folder settings. Please refer to the description of the Remote 1 option for
each item.
6) File Name
Display how the a received document will be named. You cannot change the file name.
246 Registering from TopAccess