Toshiba e-STUDIO 600 User Manual page 305

Error Code
HDD error
00E8
Software failure
00F0
Hardware noise
00F1
System access abnormality
1C10
Insufficient memory
1C11
Message reception error
1C12
Message transmission error
1C13
Invalid parameter
1C14
Exceeding file capacity
1C15
System management module access
abnormality
1C20
Job control module access abnormality
1C21-1C22
Disk access error
1C30-1C33
Image conversion abnormality
1C40
Cause
Retry communications. If the error still
occurs, contact your service representa-
tive.
Retry communications. If the error still
occurs, contact your service representa-
tive.
Retry communications. If the error still
occurs, contact your service representa-
tive.
Turn the power OFF and then back ON.
Perform the job in error again. If the error
still occurs, contact your service represen-
tative.
When there are running jobs, perform the
job in error again after the completion of
the running jobs. If the error still occurs,
turn the power OFF and then back ON,
and perform the job again.
Turn the power OFF and then back ON.
Perform the job in error again.
Turn the power OFF and then back ON.
Perform the job in error again.
When a template is used, form the tem-
plate again. If the error still occurs, turn
the power OFF and then back ON, and
perform the job again.
Ask your administrator to change the
"Fragment Page Size" setting for the Inter-
net Fax setting, or reduce the number of
pages and perform the job again.
Turn the power OFF and then back ON.
Perform the job in error again. If the
recovery is still not completed, contact
your service representative.
Turn the power OFF and then back ON.
Perform the job in error again. If the
recovery is still not completed, contact
your service representative.
When there are running jobs, perform the
job in error again after the completion of
the running jobs. If the error still occurs,
turn the power OFF and then back ON,
and perform the job again.
Turn the power OFF and then back ON.
Perform the job in error again. If the error
still occurs, contact your service represen-
tative.
Corrective Action
TopAccess Error Messages 305