Toshiba e-STUDIO 600 User Manual page 135

7) Logon User Name
Enter a valid user name that is able to logon the specified domain.
8) Password
Enter the password for the specified logon user name to logon the domain network.
9) Primary WINS Server
Specify the IP address of the primary WINS server when the WINS server is used to provide
the NetBIOS name in your local area network. This option would be more useful to access
this equipment using the NetBIOS Name form a different subnet.
When the "Obtain a WINS Server Address automatically" option is enabled in the TCP/IP
settings, the primary and secondary WINS server address can be obtained using the DHCP
server.
P.123 "Setting up the TCP/IP"
10) Secondary WINS Server
Specify the IP address of the secondary WINS server as you require when the WINS server
is used to provide NetBIOS name in your local area network. If the Primary WINS Server is
unavailable, the Secondary WINS Server will be used.
When the "Obtain a WINS Server Address automatically" option is enabled in the TCP/IP
settings, the primary and secondary WINS server address can be obtained using the DHCP
server.
P.123 "Setting up the TCP/IP"
If "0.0.0.0" is entered for Primary WINS Server and Secondary WINS Server, this equipment
will not use the WINS server.
11) SMB Signing of SMB Server
Select whether SMB Signing is enabled or disabled when a client accesses this equipment
using SMB, such as when a client accesses the shared folder in this equipment.
- If client agrees, digital signature is done for the communication — Select this to use
the digital signature to secure the communication only when a client accesses this equip-
ment with a digital signature. Even if a client accesses this equipment without a digital
signature, the communication is allowed without the digital signature.
- Digital signature is always done for the communication on the server side — Select
this to allow the communication only when a client accesses this equipment with a digital
signature. When a client accesses this equipment without a digital signature, the com-
munication is not allowed.
- Digital signature isn't done for the communication for the server — Select this to
allow the communication only when a client accesses this equipment without a digital sig-
nature. When a client is set as that it will always access a SMB server with a digital sig-
nature, the communication is not allowed.
If you do not know whether the SMB Signing of SMB Client is enabled or disabled in the cli-
ent computers, it is recommended to select "If client agrees, digital signature is done for the
communication". If this is set incorrectly, the SMB communication may become unavailable.
Setting up from TopAccess 135