Toshiba e-STUDIO 600 User Manual page 142

7 TopAccess Administrator Mode
4) Authentication
Enable or disable the authentication for accessing the POP3 server.
- Disable — Select this to disable the authentication.
- NTLM/SPA — Select this to access the POP3 server using the NTLM/SPA authentica-
tion.
- Kerberos — Select this to access the POP3 server using the Kerberos authentication.
5) Type POP3 Login
Select the POP3 login type.
- Auto — Select this to automatically designate the POP3 login type of the POP3 server.
- POP3 — Select this to use the general POP3 login type.
- APOP — Select this to use APOP login type. APOP allows users to access the POP3
server by encrypting the user name and password.
If it is not possible to Login to the mail server using "Auto", manually set the type of POP3
Login to either "POP3" or "APOP".
6) Account Name
Enter the account name for this equipment to access the POP3 server.
Please enter the account name without the domain name when "NTLM/SPA" or "Kerberos" is
selected at the "Authentication" option.
7) Password
Enter the password to access the POP3 server.
8) Scan Rate
Enter how often this equipment should access the POP3 server for new messages.
9) Port Number
Enter the port number to access the POP3 server. The port number depends on the port
setting in the POP3 server. Generally "110" is used.
10) SSL Port Number
Enter the port number to access the POP3 server using SSL. The SSL port number
depends on the port setting in the POP3 server. Generally "995" is used.
Setting up the SNTP Service
In SNTP Service, you can specify the SNTP server to refresh the time settings of this equipment
using SNTP service.
1
2
3
4
5
142 Setting up from TopAccess