Setting Up User Authentication For Scan To E-Mail - Toshiba e-STUDIO 600 User Manual

7 TopAccess Administrator Mode
3
Click [Change Password].
The Change Password window appears.
4
Enter the following items and click [Save].
Old Password — Enter your login password.
New Password — Enter a new login password. You can enter up to 64 characters.
Retype Password — Enter a new login password again.
5
Click [OK].
The password is changed.

Setting up User Authentication for Scan to E-mail

When the User Authentication for Scan to Email is enabled, users must enter the user name and
password before performing Scan to E-mail.
You can select either the SMTP or LDAP for User Authentication for Scan to Email.
SMTP Authentication
This equipment can be managed using the SMTP Authentication.
When this is configured, users must enter the user name and password that is registered in
the SMTP server to perform Scan to E-mail on the Control Panel of this equipment.
P.297 "Enabling User Authentication for Scan to Email (SMTP)"
296 Setting up User Management