Toshiba e-STUDIO 600 User Manual page 184

7 TopAccess Administrator Mode
2
Enter following items as required.
Queue Name — Enter the queue name using up to 31 alphanumeric characters. The
queue name is case sensitive so that "Queue1" and "queue1" will be added as different
queues.
Raw jobs - Duplex Printing — Select whether a raw job will be printed on both sides of
the paper.
Raw jobs - Default Paper Size — Select the default paper size that applies to a raw job.
Raw jobs - Default Paper Type — Select the default paper type that applies to a raw
job.
Raw jobs - Default Orientation — Select the default orientation that applies to a raw
job.
Raw jobs - Default Stapling — Select whether a raw job will be stapled.
Raw jobs - Default Output Tray — Select the default output tray that applies to a raw
job. A banner page that is created by NetWare, UNIX, and Windows operating systems
also will be outputted to the tray set here.
PCL Form Line — Enter the number of lines printed per page.
PCL Font Pitch — Enter the font pitch when the selected font number represents a fixed
pitch scalable font. Pitch is measured by characters per inch, so a 10-pitch is ten
characters per inch.
PCL Font Point Size — Enter the font size when the selected font number represents a
proportionally spaced scalable font. The Font Size option allows you to determine the
point size (height) of the default font.
PCL Font Number — Enter the font number of the internal PCL font to be used as the
default font for printing. You can check the font numbers and internal PCL fonts in the
Internal PCL Font List. Please see the Printing Guide for the font number of internal
PCL fonts,
PCL Line Termination — Select the type of the line termination.
Symbol set — Select the symbol set that applies to a raw job.
Paper Source — Select the paper source that applies to a raw job.
Do not Print Blank Pages — Select whether blank pages are printed or not.
3
Click [Save].
The queue name is added in the list.
184 Setting up from TopAccess