Setting Up The Remote 1 And Remote 2 - Toshiba e-STUDIO 600 User Manual

7 TopAccess Administrator Mode
2) Use Network Folder Destination
When this is selected, set the Remote 1 and Remote 2 settings to specify how users can
select the network folders for Save as file destination.
When you select "Use Network Folder Destination", make sure both "Remote 1" and
"Remote 2" are set properly. For example, even if you want to specify only the Remote 1,
you must select "Allow user to select network folder to be used as a destination" for the
Remote 2. When you select "Use Network Folder Destination", "Allow the following network
folder to be used as a destination" is initially selected for both Remote 1 and Remote 2 and
other fields are left blank. If you do not change the settings, the error message to ask you to
enter the required items to complete the setup will be displayed.
3) Default file path
Select the destination that will be set as the default destination when performing Save as file
from the Touch Panel Display.

Setting up the Remote 1 and Remote 2

In the Remote 1 and Remote 2, you can specify how users can select the network folders for
Save as file destination when you select "Use Network Folder Destination" in the Destination
setting. You can specify two network folders; Remote 1 and Remote 2. The setting items are
the same in the Remote 1 and Remote 2.
1
2
3
4
5
6
7
9
1) Allow the following network folder to be used as a destination
Select this to restrict users to select only the network folder that you specified. Otherwise,
select "Allow user to select network folder to be used as a destination".
2) Protocol
Select the protocol to be used for uploading a file to the network folder.
- SMB — Select this to send a file to the network folder using the SMB protocol.
- FTP — Select this to send a file to the FTP server.
- NetWare IPX/SPX — Select this to send a file to the NetWare file server using the IPX/
SPX protocol.
- NetWare TCP/IP — Select this to send a file to the NetWare file server using the TCP/IP
protocol.
170 Setting up from TopAccess
8