Setting Up The Snmp Network Service - Toshiba e-STUDIO 600 User Manual

7 TopAccess Administrator Mode
- Reading/writing the address book data using the AddressBook Viewer
- Backing up/Restoring the e-Filing data using the e-Filing Backup/Restore Utility
2) Enable SSL
Select whether the SSL (Secure Sockets Layer) is enabled or disabled for FTP server.
To enable SSL, you must create a self-signed certificate or import a server certificate in
Security Service. If the self-signed certificate is not created or a server certificate is not
imported, the SSL will not work correctly.
P.145 "Setting up the Security Service"
Not all operating systems support SSL for all protocols.
3) Default Port Number
Enter the port number for the FTP server. Generally "21" is used.
4) SSL Port Number
Enter the port number that is used to access this equipment using FTP with SSL. Generally
"990" is used.

Setting up the SNMP Network Service

In SNMP Network Service, you can enable or disable the SNMP to monitor the device status
using a network monitoring utility. If an administrator wants to monitor the device status with a
monitoring utility, programmed to fit the MIB, you must enable the SNMP and SNMP Traps.
1
2
3
4
5
6
7
8
1) Enable SNMP
Select whether the SNMP monitoring with MIB is enabled or disabled. This must be enabled
to allow users to connect using TopAccessDocMon, TWAIN driver, File Downloader, and the
AddressBook Viewer.
144 Setting up from TopAccess