Message Log - Toshiba e-STUDIO 600 User Manual

8 Troubleshooting
Error Code
RFC related
2500
2501
2503
2504
2550
2551
2552
2553

Message Log

The error messages displayed in the Touch Panel Display are described in the Operator's Man-
ual for Basic Function.
Front Cover Open - Please Close Cover.
314 TopAccess Error Messages
Message
Syntax error, command unrecognized
Syntax error in parameters or arguments
Bad sequence of commands
Command parameter not implemented
Mailbox unavailable
User not local
Insufficient system storage
Mailbox name not allowed
TopAccess Message
Corrective Action
Check if the Terminal mail address and
Destination mail address are correct.
Check if the mail server is operating prop-
erly. Turn the power OFF and then back
ON. Perform the job in error again.
Check if the mail server is operating prop-
erly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error
still occurs, Contact your service represen-
tative.
Check if the mail server is operating prop-
erly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error
still occurs, Contact your service represen-
tative.
Check if the mail server is operating prop-
erly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error
still occurs, Contact your service represen-
tative.
Confirm that the destination Email
addresses are correct.
Confirm the access privilege for the mail-
box in the mail server.
Confirm that the destination Email
addresses are correct.
Check if the mail server is operating prop-
erly.
Confirm that the destination Email
addresses are correct.
Confirm the available size for the mailbox
in the mail server.
Check if there is an illegal character in the
mail box in the mail server.
Corrective Action
Close the Front Cover.