Dante Audio Network Settings - Yamaha CL5 Reference Manual

Dante audio network settings

You will use the CL series console to make Dante audio network settings for the console itself and the
I/O rack connected to the Dante connector on the CL unit. This section explains how to make Dante
audio network settings.
1.
In the Function Access Area, press the SETUP button to access the SETUP screen.
2.
In the DANTE field at the center of the screen, press the DANTE SETUP button to
open the DANTE SETUP popup window.
This popup window contains the following items.
1 2
9
5 8
1
CONSOLE ID select buttons
Set the IDs for CL series consoles.
If five or more CL units are connected to a network, but you plan not to assign IDs to some of the
units, press the currently-selected button on each of those units to clear the ID.
2
SECONDARY PORT select buttons
Specify how the Dante audio network is configured.
3
BIT select buttons
Enable you to set audio bit rate to 24-bit or 32-bit.
4
Latency select buttons
Enable you to set the Dante audio network latency to 0.25 ms, 0.5 ms, 1.0 ms, or 5.0 ms.
The latency setting varies depending on the network connection method and size. For details,
refer to "Setting the Dante audio network
NOTE
3 4
Settings and are shared in common with the I/O racks.
201
3 4
6 7
latency" on page 203.
Reference Manual
Other functions